Download M536BXXS9EXJ3 Stock Recovery (Android 14) for Galaxy M53

Views: 2VIP

Download the M536BXXS9EXJ3 (Android 14) stock recovery file for your Samsung Galaxy M53 (SM-M536B). Learn how to flash the .tar file with Odin.

Download the official M536BXXS9EXJ3 stock recovery file for the Samsung Galaxy M53 (SM-M536B). This guide explains how to flash the Android 14 recovery using Odin.

Download M536BXXS9EXJ3: Restore Stock Recovery on Galaxy M53 (M536B)

This post provides the official stock recovery file (M536BXXS9EXJ3) for the Samsung Galaxy M53 5G (SM-M536B), based on Android 14 (U). This file is used to restore your device’s original recovery partition. This is essential if you have installed a custom recovery (like TWRP) and want to revert to stock to receive official OTA (Over-The-Air) updates.

File Name:STOCK RECOVERY M536BXXS9EXJ3 Android 14 U.tar
Model:Samsung Galaxy M53 5G (SM-M536B)
CPU Type:MediaTek Dimensity 900 (MT6877)
File Type:Official Stock Firmware (contains Stock Recovery)
Firmware Version:M536BXXS9EXJ3
Android Version:Android 14 (U)
Flashing Method:PC Odin (Download Mode)
Tools Required:Odin (Samsung Flashing Tool), Samsung USB Drivers
Driver Required:Samsung Mobile Phone Drivers
Purpose:Restore Stock Recovery, Unbrick, Revert to Stock
Bootloader Status:No Bootloader Unlock Required
Rating:
★★★★★★★★★★
5.0(2 Total Ratings)
Available Links:

Why Flash This Stock Recovery File?

Flashing the M536BXXS9EXJ3 recovery is the official method to revert from a custom recovery. Unlike flashing a full firmware, this is a smaller, faster process. Flashing official Samsung files does not require an unlocked bootloader.

  • Restores the original, official Stock Recovery.
  • Allows you to install official OTA updates.
  • Reverts your device from TWRP or other custom recoveries.
  • A required step before unrooting or restoring to full stock.

Requirements: Tools & Drivers

You must use a Windows PC and the official Samsung flashing tool, Odin.

  • Recovery File: The STOCK RECOVERY M536BXXS9EXJ3 Android 14 U.tar file.
  • Odin Tool: The latest version of the Samsung flash tool.
  • Samsung USB Drivers: Your PC must have the drivers installed to detect the phone.
  • Windows PC & USB Cable: A reliable PC and the original Samsung USB-C cable.

How to Flash Stock Recovery on Galaxy M53

This process is very fast and will not erase your data. However, backing up your data is always recommended.

  1. Install Drivers: Install the Samsung USB Drivers on your Windows PC.
  2. Boot into Download Mode:
    • Power off your Galaxy M53.
    • Hold the Volume Up + Volume Down buttons simultaneously.
    • While holding the buttons, connect the USB cable to your PC.
    • Press Volume Up to confirm and enter Download Mode.
  3. Launch Odin: Open the Odin executable file on your PC.
  4. Connect Phone: A blue box under “ID:COM” in Odin will appear, showing the phone is detected.
  5. Load Recovery File:
    • Click the AP button.
    • Select the STOCK RECOVERY M536BXXS9EXJ3 Android 14 U.tar file.
    • Important: Do NOT load any files in the BL, CP, or CSC slots.
  6. Start Flashing: Go to the “Options” tab in Odin and ensure “Auto Reboot” is checked. Click the “Start” button.
  7. Wait: The process is very fast. Your phone will reboot automatically after Odin shows a green “PASS” message.

YouTube Video:Watch on YouTube

" target="_blank" rel="noopener">Watch on YouTube

Conclusion

You have successfully flashed the official Android 14 stock recovery (M536BXXS9EXJ3) on your Galaxy M53 5G. Your device is now ready to receive official OTA updates and is back to its original recovery state.

Leave a Reply