Download M536BXXU3CWF1 Stock Recovery (Android 13) for Galaxy M53
| Views: 4 | VIP | |

Download M536bxxu3cwf1 Stock Recovery Android 13 For Galaxy M53
Download the M536BXXU3CWF1 (Android 13) stock recovery file for your Samsung Galaxy M53 (SM-M536B). Learn how to flash the .tar file with Odin.
Download M536BXXU3CWF1: Restore Stock Recovery on Galaxy M53 (M536B)
This post provides the official stock recovery file (M536BXXU3CWF1) for the Samsung Galaxy M53 5G (SM-M536B), based on Android 13 (T). This file is used to restore your device’s original recovery partition. This is essential if you have installed a custom recovery (like TWRP) and want to revert to stock to receive official OTA (Over-The-Air) updates.
| File Name: | STOCK RECOVERY M536BXXU3CWF1 Android 13 T.tar |
|---|---|
| Model: | Samsung Galaxy M53 5G (SM-M536B) |
| CPU Type: | MediaTek Dimensity 900 (MT6877) |
| File Type: | Official Stock Firmware (contains Stock Recovery) |
| Firmware Version: | M536BXXU3CWF1 |
| Android Version: | Android 13 (T) |
| Flashing Method: | PC Odin (Download Mode) |
| Tools Required: | Odin (Samsung Flashing Tool), Samsung USB Drivers |
| Driver Required: | Samsung Mobile Phone Drivers |
| Purpose: | Restore Stock Recovery, Unbrick, Revert to Stock |
| Bootloader Status: | No Bootloader Unlock Required |
| Rating: | |
| Available Links: |
Why Flash This Stock Recovery File?
Flashing the M536BXXU3CWF1 recovery is the official method to revert from a custom recovery. Unlike flashing a full firmware, this is a smaller, faster process. Flashing official Samsung files does not require an unlocked bootloader.
- Restores the original, official Stock Recovery.
- Allows you to install official OTA updates.
- Reverts your device from TWRP or other custom recoveries.
- A required step before unrooting or restoring to full stock.
Requirements: Tools & Drivers
You must use a Windows PC and the official Samsung flashing tool, Odin.
- Recovery File: The
STOCK RECOVERY M536BXXU3CWF1 Android 13 T.tarfile. - Odin Tool: The latest version of the Samsung flash tool.
- Samsung USB Drivers: Your PC must have the drivers installed to detect the phone.
- Windows PC & USB Cable: A reliable PC and the original Samsung USB-C cable.
How to Flash Stock Recovery on Galaxy M53
This process is very fast and will not erase your data. However, backing up your data is always recommended.
- Install Drivers: Install the Samsung USB Drivers on your Windows PC.
- Boot into Download Mode:
- Power off your Galaxy M53.
- Hold the Volume Up + Volume Down buttons simultaneously.
- While holding the buttons, connect the USB cable to your PC.
- Press Volume Up to confirm and enter Download Mode.
- Launch Odin: Open the Odin executable file on your PC.
- Connect Phone: A blue box under “ID:COM” in Odin will appear, showing the phone is detected.
- Load Recovery File:
- Click the AP button.
- Select the
STOCK RECOVERY M536BXXU3CWF1 Android 13 T.tarfile. - Important: Do NOT load any files in the BL, CP, or CSC slots.
- Start Flashing: Go to the “Options” tab in Odin and ensure “Auto Reboot” is checked. Click the “Start” button.
- Wait: The process is very fast. Your phone will reboot automatically after Odin shows a green “PASS” message.
Conclusion
You have successfully flashed the official Android 13 stock recovery (M536BXXU3CWF1) on your Galaxy M53 5G. Your device is now ready to receive official OTA updates and is back to its original recovery state.



